Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PDM/PLM for MultiCAD Environment

  • Thread starter Thread starter cshields
  • Start date Start date
Status
Not open for further replies.
C

cshields

Guest
Can anyone recommend a Product Data Management or Product Life-cycle Management tool that works with CATIA V5, Pro/E Wildfire, and UniGraphics NX3?


Thanks!
 
One such PLM tool is Winchill PDMLink from PTC.



I ahve had success is testing with all three plateforms.
 
You can use SMARTEAM for CATIA V5 and Pro/INTRALINK for Pro/ENGINEER. Let me know.
 
Status
Not open for further replies.

Similar threads

NaWin55
  • Locked
  • Question Question
CATIA CAA Capture 3D Environment screenshot
Replies
0
Views
2K
NaWin55
NaWin55
reutov_tv
  • Locked
  • Question Question
mini PLM
Replies
0
Views
168
reutov_tv
reutov_tv
hdwdlnd
  • Locked
  • Question Question
Using CATIA V5 Catalog Outside of PDM System
Replies
1
Views
254
Little Cthulhu
Little Cthulhu
A
  • Question Question
Help for Macros that "scanns" the CATdrawing sheet to get Part Number and Drawing sheet no.
Replies
3
Views
14K
Little Cthulhu
Little Cthulhu
jzecha
  • Locked
  • Question Question
Macro or Software to Create Cut list for Tubing
Replies
2
Views
1K
Little Cthulhu
Little Cthulhu

Part and Inventory Search

Sponsor

Back
Top