PDF quality in shaded mode

[cubalibre000]

Hi,
it's possible to increase the quality of the PDF, regarding the capacitor contour ?

Thank you...

Using NX 8 and TC9.1

 

[JohnRBaker]

Was this a Drawing of an Assembly? If so, did you try displaying the Components as 'Exact' representations and not 'Lightweight'? And if you have, did you change the Shade Tolerance using the View style dialog?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[cubalibre000]

Exact representation starts from NX8.5.
NX8 doesn't support 'Lightweight' in drafting. Components are converted automatically in 'Exact' representation.
Changing the Shade Tolerance doesn't change the result.
The result can be changed in the PDF setting, but what I posted is the 'high' setting.
Open an IR ?
The same drafting in SolidWorks or in Solid Edge produce a good result or a result like 'expected', said like someone would say.

Thank you...

Using NX 8 and TC9.1

 

[sundeep198]

hi, copy the program from here.
I too had similar issue, but now am using this journal and am satisfied with the quality of pdf output.

http://nxjournaling.com/?q=content/exporting-drawings-pdf-files-using-nx-journal

Regards,
Sundeep

 

[cubalibre000]

Thank you sundeep198.

Thank you...

Using NX 8 and TC9.1