Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pb with mass of sheetmetal parts in titleblock ?

Status
Not open for further replies.
prolynx

prolynx

Mechanical
Joined
Sep 9, 2005
Messages
29
Location
DK
Hello,

Does anyone know why the macro to create the titleblock given by default doesn't work properly with the mass of sheetmetal parts ?

Below if the part of the macro concerned, and if the part is a sheetmetal, then the results is always 0.00 kg.

Set ProductAnalysis = ProductDrawn.Analyze
DrwTexts.GetItem("TitleBlock_Text_Weight_1").Text = FormatNumber(ProductAnalysis.Mass,2)

My guess is that when sheetmetal is applied on the part, then the mass is defined somewhere else (not in ProductAnalysis.Mass anymore) but I don't really know.

Any help ?
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Frame/Titleblock Macro - call image file in same parent folder
Replies
6
Views
2K
Little Cthulhu
Little Cthulhu
N
  • Question Question
Part mass and CG
Replies
4
Views
5K
nicsachal
N
A
sheetmetal design problem
Replies
2
Views
2K
arca
A
Antoine Delarche
  • Locked
  • Question Question
3Dexperience: hide/show parts from an assembly with a rule
Replies
0
Views
932
Antoine Delarche
Antoine Delarche
A
  • Locked
CATIA Macro to insert parts without powercopy
Replies
1
Views
2K
AbhishekChavan
A

Part and Inventory Search

Sponsor

Back
Top