Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Patran laminate modeller - multi-layup files

Status
Not open for further replies.
Aerodesign

Aerodesign

Aerospace
Joined
Dec 3, 2001
Messages
57
Location
GB
I have a problem with Patran 2001r2a and laminate modeller. I am making layup files within LM but they are not being saved. I only noticed after making 10 or so files. The Plys are defined in Groups and l have plybooks generated so can re-create the layups OK, but l thought Patran/LM could save more than one LM_layup file at a time.
Any ideas?
 
Status
Not open for further replies.

Similar threads

Carlo Alberto
  • Locked
  • Question Question
Patran Problems
Replies
4
Views
1K
Onda
Onda
Mohamed Mowafy
  • Locked
  • Question Question
MSC Patran Subcases issue
Replies
2
Views
1K
Mohamed Mowafy
Mohamed Mowafy
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
693
gandoglassy
gandoglassy
MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
633
MihaelaN
MihaelaN

Part and Inventory Search

Sponsor

Back
Top