Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Patran Defeaturing (Fillets/Chamfers)

Status
Not open for further replies.
enghelp2806

enghelp2806

Aerospace
Joined
Nov 16, 2020
Messages
16
Location
US
Hi all,

Does Patran have any defeaturing capabilities that would allow me to remove fillets/chamfers, or am I limited to doing this in another software, like Catia? I can’t seem to find anything. Other FEA software like FEMAP have this feature, and additional powerful solid defeaturing abilities, built in.

Thanks
 
Status
Not open for further replies.

Similar threads

Carlo Alberto
  • Locked
  • Question Question
Patran Problems
Replies
4
Views
1K
Onda
Onda
Mohamed Mowafy
  • Locked
  • Question Question
MSC Patran Subcases issue
Replies
2
Views
1K
Mohamed Mowafy
Mohamed Mowafy
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
695
gandoglassy
gandoglassy
MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
637
MihaelaN
MihaelaN

Part and Inventory Search

Sponsor

Back
Top