Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PATH=3 in patran

Status
Not open for further replies.
SaeidII

SaeidII

Structural
Joined
Dec 7, 2012
Messages
18
Location
US
Hi,
Is it possible to set PATH=3 in Executive Control Section before analyzing the model?
I have already tried direct text input in that section but this command should be added after SOL command like:
SOL 700 PATH=3
I did not find any build in option to set this either. If you know how to do that please share.
Thanks.
 
Status
Not open for further replies.

Similar threads

Carlo Alberto
  • Locked
  • Question Question
Patran Problems
Replies
4
Views
1K
Onda
Onda
Mohamed Mowafy
  • Locked
  • Question Question
MSC Patran Subcases issue
Replies
2
Views
1K
Mohamed Mowafy
Mohamed Mowafy
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
695
gandoglassy
gandoglassy
MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
638
MihaelaN
MihaelaN

Part and Inventory Search

Sponsor

Back
Top