Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Parts List 1

Status
Not open for further replies.

Spaggiari

Mechanical
Joined
Apr 23, 2013
Messages
5
Location
CH
Hello;
I have N8. When I make a drafting for an assembly, the PARTS LIST is only 1 rows with the quantity of all the parts and PC NO 1. In the properties/attributes of all the part the CALLOUT value is 1. What I have to do for have a complet list of all my parts (PC NO / PART NAME / QUANTITY)differents for every parts???
Best regard
Spaggiari
 
Hi,
Can you please send us a snapshot of the assembly navigator tree and the part list in the drafting?
Are you sure that you have a proper assembly and not a single part file with multiple bodies?
Best Regards
Kapil
 
Hi Spaggiari,
It looks like a imported step file.Can you try a SELECT PART LIST right click and UPDATE PART LIST?
Regards
Kapil
 
You may have to change the level setting of the parts list.
Edit Parts List and you can choose what level of the assembly tree you want, then update.

“Know the rules well, so you can break them effectively.”
-Dalai Lama XIV
 
a)I try to UPDATE the PART LIST but nothing change!
b)I try to change all the possible levels but nothing change after update!
Any ohter idea??
Regards
Spaggiari
 
I have resolue the problem with update NX, I have problem with NX 8 and now with NX 8.5 there is NO problem parts list
Byebye
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top