Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Part name for imported dwg or dxf

Status
Not open for further replies.
cubalibre000

cubalibre000

Mechanical
Joined
Jan 27, 2006
Messages
1,070
Location
IT
Hi,
when I open DWG or DXF file, the file name of the part is XXX_dxg.prt.
I'd like XXX_TAV1.prt.
I didn't found in the customer default the suffix that determine the file name for imported DWG or DXF file.
I'm wrong ?

Thank you...

Using NX 8 and TC9.1
 
Status
Not open for further replies.

Similar threads

nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
Befuddled
  • Locked
  • Question Question
Edit UGMaster name from NX using vb.net
Replies
2
Views
1K
Befuddled
Befuddled
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
juki-hao
  • Locked
  • Question Question
Batch export DXF/DWG from folder to folder
Replies
11
Views
1K
juki-hao
juki-hao
jonathan8388
  • Locked
  • Question Question
NXOPEN Inherent Parent Name
Replies
6
Views
1K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top