Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

packed to the vacum

Status
Not open for further replies.
48660544

48660544

Aerospace
Joined
Aug 9, 2001
Messages
8
Location
DE
Of being packed to the vacuum which a material that has the same resistance thermally of the aerogel could be?
 
Status
Not open for further replies.

Similar threads

WendelTrento
  • Locked
  • Question Question
Material for manufacturing the extruder cylinder
Replies
0
Views
1K
WendelTrento
WendelTrento
preetham_alluri
  • Locked
  • Question Question
Groove formed along the welding direction in FSP simulation in DEFORM software
Replies
0
Views
799
preetham_alluri
preetham_alluri
BuonGiorno
  • Locked
  • Question Question
Force fitting a sleeve onto shaft when designed to be a shrink fit.
Replies
3
Views
2K
dgeesaman
dgeesaman
D
  • Locked
  • Question Question
etchant to confirm if silver brazing is on ferrous metal surfaces
Replies
15
Views
6K
dtimberlake
D
rollingcloud
  • Locked
  • Question Question
Best method to verify NI/CR plating composition?
Replies
7
Views
856
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top