Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

P/T ratings Nylon

Status
Not open for further replies.
FIF99

FIF99

Materials
Joined
Jul 20, 2005
Messages
96
Location
NL
Hi,

Does anybody have maximum allowable pressures at elevated temperatures for Nylon PA 12/G Ball Valve seat materials, or references to reliable graphs/tables?
I know it's also related to the diameter. In our application it's for a NPS 2" valve.
The charts I already have are generic and/or commercial not based on diameters.

Any help will be very much appreciated.
Thanks in advance.

Regards.
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
Pipe wall thickness calculation method for t≥D/6 or for P/SE>0.385
Replies
5
Views
13K
goutam_freelance
goutam_freelance
K
  • Locked
  • Question Question
Sleepers VS T support (Piping Supports)
Replies
4
Views
3K
KunAbdel
K
BamaGump
  • Locked
  • Question Question
What symbol is this? (P&ID)
Replies
3
Views
662
BamaGump
BamaGump
PagoMitch
  • Locked
  • Question Question
Piping pressure ratings vs source tank pressures
Replies
6
Views
629
LittleInch
LittleInch
ZIA49
  • Locked
  • Question Question
Hi I'm new to DNV standards, wps p
Replies
1
Views
300
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top