Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Override Shear Correction Factor for shell 181

Status
Not open for further replies.
saeedfazeli

saeedfazeli

Mechanical
Joined
Jul 19, 2007
Messages
2
Location
AU
Hi
I am using ANSYS workbench 17.1, working on a research project, need to define a new shear correction factor (k=0.83) for shell 181.
Anybody knows how to write a command for it?
Thank You
 
Status
Not open for further replies.

Similar threads

somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
andradesilva
  • Locked
  • Question Question
thin-walled 3D solid to a shell
Replies
1
Views
468
Stick.
Stick.
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
591
vsw
V
Gintoki_Satoru
  • Locked
  • Question Question
Temperature distribution for tapping process
Replies
0
Views
487
Gintoki_Satoru
Gintoki_Satoru
matparta
  • Locked
  • Question Question
Relationship between mid shell stresses and top/bottom?
Replies
1
Views
1K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top