Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Optimized Battery Location for Heavy Construction Equipment

Status
Not open for further replies.
rlh457

rlh457

Electrical
Joined
Feb 28, 2005
Messages
1
Location
US
Can anyone help? We need a snapshot on safely optimizing a start-battery's physical location in a diesel-powered excavator. Our concerns are out-gassing, shorting due to dirt and/or debris build-ups, normal maintenance/replacement issues, et cetera. Are there OSHA, IEC, ANSI, IOS standards that apply or is this another of the ambiguous (gray) areas?

Thank you in advance for your help .... RLH457
 
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question Question
High-Power Lithium-Ion Battery Testing, Rapid and Non-Invasive Methodologies
Replies
0
Views
1K
Nick Peroulax
N
racookpe1978
  • Locked
  • Question Question
New NiCd battery in small appliance, internal charger/inverter. Should I discharge it, then fully recharge for best long-term performance?
Replies
0
Views
1K
racookpe1978
racookpe1978
k2panman
  • Locked
  • Question Question
(Old) Electrical Engineer - how does an active BMS work on an LFP battery
Replies
0
Views
831
k2panman
k2panman
BjMag
  • Locked
  • Question Question
Predicting the time for replacing Li-Ion battery
Replies
13
Views
1K
IRstuff
IRstuff
moonloopsun
  • Locked
  • Question Question
Battery Construction Question
Replies
1
Views
761
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top