Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Opening an AutoCAD file with NX in TC
- Thread starter jerry1423
- Start date
Yes.
You have to use the file -import option , To be able to file-open something, the file must exist in the TC database.
Maybe, this is possible if that datatype is defined in TC and the integration is setup. It is not in "our" setup.
Regards,
Tomas
Never try to teach a pig to sing. I wastes your time and it annoys the pig.
You have to use the file -import option , To be able to file-open something, the file must exist in the TC database.
Maybe, this is possible if that datatype is defined in TC and the integration is setup. It is not in "our" setup.
Regards,
Tomas
Never try to teach a pig to sing. I wastes your time and it annoys the pig.
- Status
Similar threads
- Locked
- Question
- Locked
- Question