Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

OM york chiller

Status
Not open for further replies.

fayadabdallah

Mechanical
Joined
Oct 24, 2015
Messages
1
Location
RO
Hello All,

I have been assigned as engineer for operation and maintenance project which contain 6 OM chiller 2000 ton each , I am new to this field and i need some advice how to manage this site and what i should focus on during the first period.
Knowing that the chiller are very old model every thing is manual PRV,HGP,INTSTG, AUOP and its air cooled condenser, condenser in very bad condition, reading from BMS is not accurate, the client change the refrigerant for one of the chiller from R-12 to R-416 which is not designed for and this is causing a lot of
oil leakage from the shaft seal.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top