Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Old Fiber glass casing pipe(GRP casing 4-1/2" OD)

Status
Not open for further replies.

metboss

Petroleum
Sep 12, 2012
152
Hi All,

I would like to ask you for some advice regarding inspection of old GRP pipes (4-1/2") which will be used as Casing in our new oil well service application.
Above casings (200 No's) were received two years ago and stored in our yard with tarpaulin cover. Now, end user is asking us to carry out inspection and clear these casing for well service application. I suppose, these casings were exposed to sunlight/UV and may have lost some physical properties. How can I ensure it? Are there any laboratory tests to be conducted prior to application? I need some advice with code reference.

Thank you.

Metboss
 
Replies continue below

Recommended for you

Please add comments to his existing thread on the same subject.

Metboss, please don't double post like that again. If, as in this case, two disparate specialties comprise the correct audience, please post a single message in one forum, and a link to it in the other. Thanks.



Mike Halloran
Pembroke Pines, FL, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor