Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

OHL steel lattice tower

Status
Not open for further replies.
salem

salem

Electrical
Joined
May 2, 2001
Messages
38
Location
AE
for 33 kV double circuit OHL lattice steel towers, what is the criteria for selecting the back to back distance (distance between tower legs).
is it related to tower height, or tower slop ?.
any reference for the above.
 
Status
Not open for further replies.

Similar threads

FaizEll
  • Locked
  • Question Question
OHL 220KV Accident
Replies
5
Views
453
wcaseyharman
wcaseyharman
Kayaker11
  • Locked
  • Question Question
Calculating Attenuation of GPR Transfer on OHL Grounds/Buried Grounds
Replies
4
Views
447
jghrist
jghrist
SilverfoxUK
  • Locked
  • Question Question
Single core cables and a mild steel gland plate.
Replies
13
Views
2K
SilverfoxUK
SilverfoxUK
SilverfoxUK
  • Locked
  • Question Question
trefoil cable and a steel frame transit.
Replies
8
Views
560
che12345
che12345
Foster21
  • Locked
  • Question Question
High Pressure Fluid Filled Pipe Cable - Steel Pipe Integrity Requirements
Replies
1
Views
231
thermionic1
thermionic1

Part and Inventory Search

Sponsor

Back
Top