Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NYLON DRIVE SPROCKET

Status
Not open for further replies.
PUMPMANPLEE

PUMPMANPLEE

Mechanical
Joined
Mar 29, 2003
Messages
19
Location
AU
Greetings gear & pulley gurus,

we have stainless steel
conveyor roller chains
driven by stainless steel
drive sprockets of P.C.D
700 mm.

it is basically a vertical
bucket type vertical elevator
with centre distance between
drive sprockets & driven sprockets
of 3 metres.

it is a very low load application
and low speed; ie load is
less than 400 kilograms,
speed is 1.5 to 3.0 r.p.m.

we want to replace the stainless
steel drive sprockets with NYLON
DRIVE SPROCKETS.

would the NYLON DRIVE SPROCKETS be
compatible for use with the
stainless steel conveyor roler chain.

PUMPMANPLEE

 
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Mutilated Worm Drive for Intermittent Cam
2
Replies
22
Views
9K
vne147
V
Sicilian Engineer
  • Locked
  • Question Question
Belt Driven Industrial Robotic Concept
Replies
10
Views
4K
XR250
XR250
Ivan Silva
  • Locked
  • Question Question
Lubrification on sprocket gear
Replies
3
Views
324
Ivan Silva
Ivan Silva
Ryan.z
  • Locked
  • Question Question
ASA I Sprocket Standard???
Replies
1
Views
292
desertfox
desertfox
Suryakanth
  • Locked
  • Question Question
Is it mandatory to use Helical gears(drive-driven) as a set? Is mix usage OK?
Replies
3
Views
538
geesamand
geesamand

Part and Inventory Search

Sponsor

Back
Top