Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
nx9 cast retirement
- Thread starter helperug
- Start date
JohnRBaker
Mechanical
To learn about the program, 'Learning Advantage', which is replacing CAST, please go to:
And if you have a paid up license for CAST, there is a process to convert those licenses over to 'Learning Advantage', so if you're interested please contact either you Siemens PLM Software representative or the organization that you've been getting your software and support from.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
And if you have a paid up license for CAST, there is a process to convert those licenses over to 'Learning Advantage', so if you're interested please contact either you Siemens PLM Software representative or the organization that you've been getting your software and support from.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
RUGmechanic
Mechanical
@John,
Is it possible to somehow use "learning advantage" offline?
I have a standalone / offline workstation running NX 9.
Older budweiser
NX8.5 & NX9.0 64bit, hp z820
Is it possible to somehow use "learning advantage" offline?
I have a standalone / offline workstation running NX 9.
Older budweiser
NX8.5 & NX9.0 64bit, hp z820
JohnRBaker
Mechanical
NO release of NX 'comes with CAST'. It was an extra cost product, as is 'Learning Advantage'. For more information, please see the link in my previous post in this thread.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
Hi John,
If I could re-phrase the question... is CAST available for NX8.5?
Thanks, Carl
NX 7.5 with TC 8.3
If I could re-phrase the question... is CAST available for NX8.5?
Thanks, Carl
NX 7.5 with TC 8.3
I think NX8.5 Cast exists but it has been removed from the download listing.
Maybe you can request it from your sales rep.
Siemens obviously wants us to move to the Learning Advantage.
which requires admin work for us sysadmins, since you have to setup the users who should have access.
Regards,
Tomas
Maybe you can request it from your sales rep.
Siemens obviously wants us to move to the Learning Advantage.
which requires admin work for us sysadmins, since you have to setup the users who should have access.
Regards,
Tomas
JohnRBaker
Mechanical
Technically, NX 8.5 is the last release for which there is the option to use it with CAST. And you should still be able to get it, but you may have to directly contact your Siemens PLM representative or the VAR that you are getting your local support from to make arrangements to get a copy of the files.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Status
Similar threads
- Locked
- Question
- Locked
- Question