NX6 Sweep

[Franco13Luis]

Hello

I have some problems to make a Sweep this needs to follow an square form but I can ge it.

This is from a body and I alredy found the values of the Helix like the pitch, radi and number of turns. I also have the Sketch form that follow the Helix but this is not correct

I attach a picture for more details

Thanks

 

[cowski]

For starters, change the 'orientation method' to 'vector direction' and choose the axis of your helix, this will keep the section from twisting as it is swept.

 

[mmauldin]

I tried to create a reasonable facsimile of your part. I broke it down into several feature rather than trying to to get there in one step.