Oct 30, 2006 #1 EngMfg1 Aerospace Dec 9, 2004 40 hi all can anybody let me know how to execute a grip program in nx4 thanks
Oct 30, 2006 #2 looslib Mechanical Jul 9, 2001 4,205 Don't know explicitly about MX4, but in prior versions it was: File-Execute-GRIP "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli Sr IS Technologist L-3 Communications Upvote 0 Downvote
Don't know explicitly about MX4, but in prior versions it was: File-Execute-GRIP "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli Sr IS Technologist L-3 Communications
Oct 30, 2006 #3 phillpd Mechanical Oct 19, 2006 780 Ctrl+G should work, unless that accelerator has been redefined. Paul D Phillips Upvote 0 Downvote
Oct 30, 2006 #4 JohnRBaker Mechanical Jun 1, 2006 37,216 If you are using any of the out-of-the-box 'roles', make sure that you are using one of them that has 'full menus', otherwise the File/Execute option is not available. John R. Baker, P.E. Product "Evangelist" NX Product Line UGS Corp Cypress, CA http://www.ugs.com Upvote 0 Downvote
If you are using any of the out-of-the-box 'roles', make sure that you are using one of them that has 'full menus', otherwise the File/Execute option is not available. John R. Baker, P.E. Product "Evangelist" NX Product Line UGS Corp Cypress, CA http://www.ugs.com
