Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX10 updates 1
- Thread starter flam04
- Start date
JohnRBaker
Mechanical
NX 10.0.2 is already available for download but there were no significant enhancements from the NX 10.0 release. Nx 10.0.3 will be available in a couple of months but again, no significant enhancements.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
When 10.0.3 is released, you can download the Release Notes and What's New Guide to review.
If you have CAM users, you should be aware that CAM functionality is released in maintenance releases. For example, NX 10.0.1, 10.0.2, and 10.0.3 have CAM enhancements; which will all be included in NX 11.
Mark Rief
NX CAM Customer Success
Siemens PLM Software
If you have CAM users, you should be aware that CAM functionality is released in maintenance releases. For example, NX 10.0.1, 10.0.2, and 10.0.3 have CAM enhancements; which will all be included in NX 11.
Mark Rief
NX CAM Customer Success
Siemens PLM Software
-
1
- #5
JohnRBaker
Mechanical
I would go with NX 10.0.2 right now. These are basically maintenance only releases and while NX 10.0.3 might have some issues addressed which were not in NX 10.0.2, there are no show-stoppers that we're aware of.
As for enhancements, there actually were a few in NX 10.0.2. For those of you who may have been following the discussion earlier this year about changes to the Drafting functions for editing dimensions, there were a couple of video workshops where our Drafting project management team listened to and then proposed a series of changes/enhancements to the dialogs and workflow when editing Dimensions and many of these changes were made in NX 10.0.2. Also there were several enhancements and updates for CAM functionality as well as some in the area of shipbuilding.
As for NX 10.0.3, again it appears that the majority of the limited number of enhancements are going to be in the area of manufacturing.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
As for enhancements, there actually were a few in NX 10.0.2. For those of you who may have been following the discussion earlier this year about changes to the Drafting functions for editing dimensions, there were a couple of video workshops where our Drafting project management team listened to and then proposed a series of changes/enhancements to the dialogs and workflow when editing Dimensions and many of these changes were made in NX 10.0.2. Also there were several enhancements and updates for CAM functionality as well as some in the area of shipbuilding.
As for NX 10.0.3, again it appears that the majority of the limited number of enhancements are going to be in the area of manufacturing.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Status
Similar threads
- Locked
- Question
