Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX CAM postprocessor linking in Post Builder

Status
Not open for further replies.
ma1ster

ma1ster

Mechanical
Sep 22, 2015
10
Hello,

I have 2 postprocessor files with .tcl and .def entensions. What I know is I need .pui file to be able to edit it in Post Builder. Is there any way I can link those files to generic new postprocessor or any other way ?
 
Status
Not open for further replies.

Similar threads

kanoa9321
  • Locked
  • Question
NX CAD CAM Workstation Recommendations
Replies
4
Views
4K
Rob_N
Rob_N
AlexCLE
  • Locked
  • Question
Post builder change full circles to shorter arcs
Replies
0
Views
978
AlexCLE
AlexCLE
nxexplorer
  • Locked
  • Question
NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Replies
0
Views
257
nxexplorer
nxexplorer
Jashe
  • Question
Sketch Failure Message in NX 1
Replies
3
Views
2K
Jashe
Jashe
orlandoa11
  • Locked
  • Question
WAVE Linking/publications in NX
Replies
2
Views
481
jerry1423
jerry1423

Part and Inventory Search

Sponsor

Back
Top Bottom