Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

nx 10 drafting view update

Status
Not open for further replies.

ashokrajkandan

Automotive
Joined
Mar 20, 2018
Messages
2
Location
US
Hello,

I am using NX 10.0. in which i have issue on drafting view update after model update.

The thing is that already I have done modeling and drafting in assembly file. in which I changed/replaced some components and went to drafting and the changes not displaying in views after giving update. But when I took new base view it came with changes.

since already i did some drafting in existing view i would like to utilize that view but i am not able to update the view with current change.

please guide me how to reflect changes in existing drafted view.
 
After the model update did you also update the drawing views? Right click the drawing sheet in the part navigator and choose "update".

Also, check the view settings and make sure the view is not marked as "snapshot"; this is an option that you can toggle on/off. Views in snapshot mode do not update with model changes.

www.nxjournaling.com
 
Hi Cowski,

I got solution for this issue.

I did below process....

Go to drafting and choose format - > visible in view - > select the view and make sure the layer that the component was on is visible in the drawing view

Thank you very much for your response.


 
 http://files.engineering.com/getfile.aspx?folder=6a2948de-486d-4d55-8a0a-26a1fe4c1281&file=NX_10.0_view_update_issue_solution.pptx
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top