Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nozzle attached to Dimple Jacket

Status
Not open for further replies.
gurtej

gurtej

Mechanical
Joined
Aug 25, 2008
Messages
8
Location
CA
I have a vessel in which a 5/64 thick dimple jacket is on top of a 3/16th thick vessel. I did calculations for dimple jacket as per UW-19(c)(2). There are also 3 nozzles attached to this jacket as UW 16.1(m).
How do I do calculations for these nozzles?
 
Status
Not open for further replies.

Similar threads

IdanPV
  • Locked
  • Question Question
Nozzle to Shell Weld
Replies
11
Views
5K
DekDee
DekDee
Vessel-SA
  • Question Question
nozzle-head PWHT
Replies
14
Views
15K
Trestala
Trestala
BSAS-GWB
  • Question Question
Fatigue - Nozzle Inside Corner Radius
Replies
2
Views
9K
CuMo
CuMo
Sajjad2164
  • Question Question
ASME VIII-1 Nozzle Spacing Clash
Replies
7
Views
11K
Si-bo
Si-bo
dbday
  • Locked
  • Question Question
Nozzle bore machining
Replies
5
Views
3K
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top