norm bell-type ANSI size 16

[pvdvyve]

Hay, all,Who can give me the data for a centre-hole drill with following norm:
bell-type ANSI size 16
Thanks in advance.
Please send data to pascal.vandevyver@cnh.com Greetings from Belgium (Europe).

 

[pvdvyve]

Take a look at asa b5.12-1958-bell type. May be a hint. Greetings from Belgium (Europe).

 

[gearguru]

body dia = .5"
drill dia = 3/16"
bell dia = .4"
drill length = 3/16"

You can find it in the Machinery Handbook.
gearguru

 

[pvdvyve]

Thank you. I found it in the Machinery's Handbook. It's an old one: seventeenth edition dated 1964. I didn't know ANSI and ASA could be the same. As an European I'm easier with DIN, ISO, BIN, NEN, and that kind of stuff. Greetings from Belgium (Europe).

 

[gearguru]

My pleasure.
In the Europe I'd use some metric standard.
Greetings to Belgium, (Europe) from an exEuropean!
gearguru