Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

nonlinear pushover analysis

Status
Not open for further replies.
engrdavidfrancis

engrdavidfrancis

Structural
Joined
Jun 7, 2007
Messages
4
I have using nonlinear pushover analysis for my design(new) and desing investigation(existing) for a year, and i wanted to have a deep knoledge for this procedure. Is there anyone else could teach me, special using the software of ETABS. Sometimes i had a problems encounter, could somebody give scenarios-problems in using ETABS for NSP-and a solution for it. THANK IN ADVANCE.
 
Status
Not open for further replies.

Similar threads

X4vier
  • Locked
  • Question Question
Two-stages analysis procedure
Replies
1
Views
1K
Luceid
Luceid
eegultekin
  • Locked
  • Question Question
Modal Analysis Results
Replies
3
Views
1K
JoshPlumSE
JoshPlumSE
Yug Maharjan
  • Locked
  • Question Question
P delta analysis in Etab
Replies
1
Views
522
JoshPlumSE
JoshPlumSE
ENGJP22
  • Locked
  • Question Question
Merge Analysis Results
Replies
0
Views
515
ENGJP22
ENGJP22
sriharsha.g
  • Locked
  • Question Question
Non Linear Push over analysis in Etabs - Solver settings and solution scheme in Non Linear parameter
Replies
2
Views
1K
sriharsha.g
sriharsha.g

Part and Inventory Search

Sponsor

Back
Top