Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nominal Pressure

Status
Not open for further replies.
june69

june69

Computer
Joined
Feb 22, 2002
Messages
1
Location
GB
What does PN40 stand for exactly is it Pressure Nominal of a e.g. Valve class, Process Connection class or both.
 
Sort by date Sort by votes
It refers to the flanges pressure class as well.The allowable pressure is a function of temperature and material of teh flange.See ANSI B16.5
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rika kose
  • Locked
  • Question Question
Installation Pressure test
Replies
5
Views
716
rika kose
rika kose
Mech 3D
  • Locked
  • Question Question
Acceptable tolerance for surface defects on pressure piping
Replies
9
Views
5K
mfgenggear
mfgenggear
elopez
  • Locked
  • Question Question
Pressure Testing Help/Recommendations
Replies
5
Views
701
Prometheus21
Prometheus21
Channo
  • Locked
  • Question Question
Spring Adjustment in Pressure relief valve
Replies
6
Views
1K
Channo
Channo
Bradley5
  • Locked
  • Question Question
Help selecting a low pressure, higher volume air blower.
Replies
5
Views
844
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top