No shaded with edges on assembly ? 2

[2000mustanggtguy]

I have a assembly that doesn't allow me to shade the assembly. So it displays in wireframe mode only, is anyone having the same problem in sw2005 ?

Printed Circuit Board Designer
Salt Lake City, Utah
Stangs rule!

 

[CorBlimeyLimey]

Model or drawing?
Just the one assy ... no others?


Making the best use of this Forum. faq559-716
How to get answers to your SW questions. faq559-1091
Helpful SW websites every user should be aware of. faq559-520

 

[arcticcatmatt]

is large assembly mode on?

 

[2000mustanggtguy]

I'm only having problem with one assembly but all the other smaller assembly seem to open fine.

Printed Circuit Board Designer
Salt Lake City, Utah
Stangs rule!

 

[SBaugh]

Tools\Large assembly mode - there is an option that might be on. It doesn't have to be in the Tools\Options - Go to the Pull downs and find Large assembly mode icon. Toggle it off and see if that fixes the issue.

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376

 

[CorBlimeyLimey]

How large is the file?

As arcticcatmatt suggests, when the problem assy is open, check whether the large assy mode has been activated.
Go to Tools & select or toggle Large assy mode on & off to see if that corrects the problem.

Also go to Tools & select Assembly statistics & post the results.


Making the best use of this Forum. faq559-716
How to get answers to your SW questions. faq559-1091
Helpful SW websites every user should be aware of. faq559-520

 

[2000mustanggtguy]

SBaugh,

That worked ! Thank-you for your help .

Printed Circuit Board Designer
Salt Lake City, Utah
Stangs rule!