Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Analysis Required

Status
Not open for further replies.
Alan Shen

Alan Shen

Aerospace
Joined
May 27, 2019
Messages
2
Location
CA
I am the beginner of Patran/Nastran.

I finished the model and when I want to submit for analysis. Patran's output is "no analysis required". However, when I use Nastran to run it, it is working. Anyone knows why this is happening?
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Nonlinear Buckling Analysis after Pretensioning (Wrinkling Study – Patran/Nastran SOL 400)
Replies
0
Views
5K
Nic0
N
N
  • Question Question
Patran/Nastran Buckling Analysis – SYSTEM FATAL MESSAGE 7340 (LNNHERR)
Replies
1
Views
6K
ThomasH
ThomasH
S
  • Locked
  • Question Question
Problem in Modal analysis
Replies
5
Views
4K
BlasMolero
BlasMolero
catalina29
  • Locked
  • Question Question
Nastran SOL400 normal modes analysis with touching contact
Replies
1
Views
3K
karachun
karachun
Itxusta
  • Locked
  • Question Question
2d axisymmetric analysis of a revolution part
Replies
3
Views
1K
Itxusta
Itxusta

Part and Inventory Search

Sponsor

Back
Top