NMAP Cyllindrical Usage

[knez]

Hello everyone,
I have a 3D rectangular shape and want to bend it into a Cyllinder using abaqus but I have been experiencing some issues. What is the correct way to use NMAP command.

 

[FEA way]

You could use the Wrap Mesh plug-in. It's available in the QA00000008170: Abaqus/CAE Plug-in to Wrap a Flat 3D Mesh into a Cylindrical Shape Knowledge Base article.

 

[knez]

Is it possible to share a link if you have, I could not able to find it.

 

[FEA way]

Most likely access is limited to users with commercial accounts and that’s why you can’t see it.