Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NITROGEN USE DURING PRV TESTING

Status
Not open for further replies.

JAlton

Mechanical
Joined
Jan 19, 2003
Messages
227
Location
US
I am using a 2200 psi DOT Bottle to fill a 3 cubic foot, 3000 psi, Test Vessel.
The bottle has 230 cubic feet of nitrogen. How many times can I fill the 3 cubic foot vessel before the DOT bottle is empty? Seems it would depend on the PRV Set Pressure? If so, 125 psi, 650 psi and 1440 psi are typical. Thanks.


JAC
 

Boyles law: (P1xV1)/T1 = (P2xV2)/T2 should give an approximate value.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top