Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NFPA Signoff

Status
Not open for further replies.
lfg2007

lfg2007

Mechanical
Joined
Oct 15, 2007
Messages
17
Location
US
Who is responsible to sign off a project when the sprinkler system is designed by a FP contractor according to specifications by the project engineer. FP drawings and calcs submitted by contractor were sealed by PE.
 
Sort by date Sort by votes
It depends on the contractural agreements and the requirements of the authority having jurisdiction.
 
Upvote 0 Downvote
waht do you mean by "sign off a project"???????
 
Upvote 0 Downvote
In the state of TX, the LICENSED SPRINKLER CONTRACTOR is responsible. Don't know about other states.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SprinklerDesigner2
  • Locked
  • Question Question
Question about whether a system is NFPA 13 or NFPA 13R
Replies
1
Views
3K
TravisMack
TravisMack
M.Jamali
  • Question Question
NFPA 12- CO2 SUPPRESSION - DISCHARGE FLOW RATE
Replies
0
Views
333
M.Jamali
M.Jamali
voltagevortex
  • Locked
  • Question Question
NFPA 70 - Voltage Drop Recommendations
Replies
1
Views
2K
cdafd
cdafd
P
  • Question Question
NFPA 20 - Check valve on fuel return line
Replies
1
Views
3K
LittleInch
LittleInch
StruggleEngr
  • Locked
  • Question Question
NFPA 780 Chapter 8 Section 8.4 Interpretation
Replies
2
Views
2K
StruggleEngr
StruggleEngr

Part and Inventory Search

Sponsor

Back
Top