Jun 22, 2009 #1 darryl62 Industrial Joined Jun 22, 2009 Messages 3 Location TT Are there any NFPA Guidelines for the re-Joining of fire detection and signal wiring after they have been cut or sabotaged. Our Fire riser was sabotaged. Many Thanks
Are there any NFPA Guidelines for the re-Joining of fire detection and signal wiring after they have been cut or sabotaged. Our Fire riser was sabotaged. Many Thanks
Jun 22, 2009 #2 Arsnman4 Specifier/Regulator Joined May 21, 2009 Messages 54 Location US NFPA 72, 2007 Section 9.7.1.6.4 & .2 and NEC Article 760 "Fire suppression is a failure in prevention" Upvote 0 Downvote
NFPA 72, 2007 Section 9.7.1.6.4 & .2 and NEC Article 760 "Fire suppression is a failure in prevention"
Jun 23, 2009 Thread starter #3 darryl62 Industrial Joined Jun 22, 2009 Messages 3 Location TT Many Thanks, Upvote 0 Downvote