Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Newbie Question...
- Thread starter muddluvr
- Start date
Double click, and select them independently for text height adjustment.
If I'm understanding you correctly, you want to go from this:
To this:
---
Professional and reliable CAD design engineering services - Specializing in Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
If I'm understanding you correctly, you want to go from this:
To this:
---
Professional and reliable CAD design engineering services - Specializing in Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
- Thread starter
- #3
Forgot to mention - once you select the text, (after double clicking) you just need to use the pull down box for size, in the "dimension properties" icon bar.
I guess you probably figured that, though...
---
Professional and reliable CAD design engineering services - Specializing in Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
I guess you probably figured that, though...
---
Professional and reliable CAD design engineering services - Specializing in Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.
- Status
Similar threads
