Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

New ACI 2002 Code Article

Status
Not open for further replies.
Dr. S. K. Ghosh has written a brief article in the latest PCI magazine outlining some significant changes in the new ACI 2002 code.

The primary change is updating the load combinations to agree more fully with ASCE 7-98 but there are other significant revisions as well.
 
Click to expand...
Status
Not open for further replies.

Similar threads

jochav52802
  • Question Question
Okay to use headed anchor tension reinforcement per ACI 318-19?
Replies
1
Views
6K
HTURKAK
HTURKAK
mjhaveri
  • Locked
  • Question Question
ACI 318-19 Shear reinforcement design for Piles
Replies
0
Views
2K
mjhaveri
mjhaveri
dstruct99
  • Locked
  • Question Question
ACI 318-19 Special shear wall Design with non uniform shape
Replies
4
Views
2K
dstruct99
dstruct99
lexpatrie
  • Locked
  • Question Question
Unit weight of Raw Sewage (ACI 350)
Replies
5
Views
2K
lexpatrie
lexpatrie
mgoodenough
  • Locked
  • Question Question
Stacking or "Piggybacking" of headed shear studs ACI 318-19 R22.6.6.2
Replies
2
Views
1K
GC_Hopi
GC_Hopi

Part and Inventory Search

Sponsor

Back
Top