Can anyone please tell me where I can find official structural blueprints (front, lft, rt, top and bottom **including panels) for the A-10C, HC-130, and HH-60. I am trying to build correct and to-scale 3D models of these arcft for training and other aps. Any help would be great. I have already looked in the GS series T.O.s but no joy (illustrations are way off). Thanks again.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need official blueprints to creat a 3D model...
- Thread starter Noguchi
- Start date
Do you have a contract with the Military for which you need this info?
If so you should be able to ask your contracting officer for it.
I used to look more at the store AEII's but I think they had them for aircraft too, this would give out line dimensions etc. but not in the detail you may need.
Look around really closely and you may be able to find something existing, a colleague did this for the F16 when we were looking at doing some aero analysis of a stores interface.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
If so you should be able to ask your contracting officer for it.
I used to look more at the store AEII's but I think they had them for aircraft too, this would give out line dimensions etc. but not in the detail you may need.
Look around really closely and you may be able to find something existing, a colleague did this for the F16 when we were looking at doing some aero analysis of a stores interface.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
- Thread starter
- #3
Aircraft Equipment Installation Information.
Basically an outline drawing of things like stores, bomb racks etc.
I thought maybe there was the same, or equivalent, for the aircraft them selves but I may be imagining it.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
Basically an outline drawing of things like stores, bomb racks etc.
I thought maybe there was the same, or equivalent, for the aircraft them selves but I may be imagining it.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
- Thread starter
- #5
I didn't put a link. Certain keywords get picked up by advertisers and links put in.
I used the wrong term. AEII was specific drawing for a store. The big Manual is the ASIM. I'm not sure it'll have all the info you need though.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
I used the wrong term. AEII was specific drawing for a store. The big Manual is the ASIM. I'm not sure it'll have all the info you need though.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at
Majortomski
New member
You will want to go to each of those aircraft project managers at the depot that work on them and ask for the propriatary loft line drawnings for that weapon system. The structural drawings will be a nightmare to get the data from. Or you could also ask the program manager if they already have 3D files.
T.Solinski
Former C/KC-135 Structrual Engineer.
T.Solinski
Former C/KC-135 Structrual Engineer.
- Status
Similar threads
- Question
- Locked
- Question
- Question