We have a few buildings that have pumps that are about 200lbs with 500lb motors. We need a way to pick these units up and over piping and instrumentation. The lift point is about 10' out and the arm of the unit would have to be at least 6' above the floor to avoid piping. I have been looking at Ruger and Spider Lifts. The areas are really tight. The unit will also have to fit through mandoors. Ideas?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need mini crane for very tight spaces - ideas?
- Thread starter USAeng
- Start date
Take a look at this product. I did a google search and found this.
PersonalProfile
Mechanical
Maybe something like this:
Maybe there is an option is to install some complimentary infrastructure (monorail, lifting points).
Regards,
Lyle
Maybe there is an option is to install some complimentary infrastructure (monorail, lifting points).
Regards,
Lyle
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question