Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a 390 Deg F 2-way control valve w/ electric actuator

Status
Not open for further replies.
BronYrAur

BronYrAur

Mechanical
Joined
Nov 2, 2005
Messages
802
Location
US
Looking for a 1-1/2" 2-way modulating control valve with electric actuation for a 390 deg F high-temp hot water application. I am only finding pneumatic valves are that temp. Any suggestions
 
Sort by date Sort by votes
You may find electro-hydraulic actuators. Also the actuator is not exposed to the 390 degree F temperature unless located inside an oven.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

neroverdi41
  • Locked
  • Question Question
Control Valve and Diaphragm Actuator Force Calculation
Replies
4
Views
3K
neroverdi41
neroverdi41
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
neroverdi41
  • Question Question
Control Valve CFD Analysis
Replies
11
Views
9K
neroverdi41
neroverdi41
neroverdi41
  • Question Question
Axial Control Valve Sizing
2
Replies
36
Views
16K
neroverdi41
neroverdi41
I
  • Locked
  • Question Question
Control valve sizing: Xt value
Replies
8
Views
5K
CLinton Eli Rawls
C

Part and Inventory Search

Sponsor

Back
Top