Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
need 17-4PH Fatigue Data
- Thread starter JBP81UMD
- Start date
- Thread starter
- #3
TVP, thanks for the reply. I always keep that big fat binder at arm's reach, and had already checked it.
I also have
DOT/FAA/AR-MMPDS-01, " Metallic Materials Properties Development and Standardization (MMPDS)"
as a softcopy (-5's replacement)
unfortunately the both too often don't have the specific data I need, especially dealing with fatigue. I just wish the designers would keep that in mind when they select materials. They should be prepared to provide ALL info on the material selected, but don't do it too often. I rant....
I also have
DOT/FAA/AR-MMPDS-01, " Metallic Materials Properties Development and Standardization (MMPDS)"
as a softcopy (-5's replacement)
unfortunately the both too often don't have the specific data I need, especially dealing with fatigue. I just wish the designers would keep that in mind when they select materials. They should be prepared to provide ALL info on the material selected, but don't do it too often. I rant....
- Thread starter
- #5
- Status
