ATSE
Structural
- May 14, 2009
- 594
I am requesting suggestions for an undergraduate (not graduate) textbook or reference book for design of natural gas transmission and storage. Away from the oil field and drilling.
I have seen the following:
Handbook of Natural Gas Transmission and Processing by Saeid Mokhatab, William A. Poe and James G. Speight
and
Oil and Gas Pipeline Fundamentals by John L. Kennedy
but don't have a point of reference.
Just looking for one technical book that covers 90% of the core basics. If I was getting a second book, it would be the business side of natural gas.
I have a BS in civil, and MS in structural.
Have never dealt with gas-pressure pipe (just water pipe).
I have Roberson/Crowe's Engineering Fluid Mechanics 5th edition from undergraduate, but would like something specific to nat gas and propane.
I posted this question on the Pipelines forum with no luck.
Thanks
I have seen the following:
Handbook of Natural Gas Transmission and Processing by Saeid Mokhatab, William A. Poe and James G. Speight
and
Oil and Gas Pipeline Fundamentals by John L. Kennedy
but don't have a point of reference.
Just looking for one technical book that covers 90% of the core basics. If I was getting a second book, it would be the business side of natural gas.
I have a BS in civil, and MS in structural.
Have never dealt with gas-pressure pipe (just water pipe).
I have Roberson/Crowe's Engineering Fluid Mechanics 5th edition from undergraduate, but would like something specific to nat gas and propane.
I posted this question on the Pipelines forum with no luck.
Thanks
