Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multiple usage drawings 1
- Thread starter ConnieS
- Start date
-
1
- #2
Potentially.
What government?
Which customer withing that government?
Are both programs with the same contracting office or equivalent?
At a previous employer we'd often make a copy of the drawings from program when we wanted to use them on a new one. This was because if they were for different contracting offices, then while at present they may be interchangeable we couldn't guarantee they would be in future.
Since the govt effectively owned the drawing packs & could choose to give them to another contractor at some point we couldn't rely just on our own internal procedures to take care of it - so hence we'd create new identical drawings.
What government?
Which customer withing that government?
Are both programs with the same contracting office or equivalent?
At a previous employer we'd often make a copy of the drawings from program when we wanted to use them on a new one. This was because if they were for different contracting offices, then while at present they may be interchangeable we couldn't guarantee they would be in future.
Since the govt effectively owned the drawing packs & could choose to give them to another contractor at some point we couldn't rely just on our own internal procedures to take care of it - so hence we'd create new identical drawings.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question