Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple configurations in one file

Status
Not open for further replies.
SvenVoeten

SvenVoeten

Mechanical
Joined
Mar 11, 2015
Messages
22
Location
NL
Hi Guys

In the past I would just create a different MCS for each configuration when I didn't used a virtual machine and with a virtual machine I would create a setup file for each configuration.
Is there a better way to use multiple configurations when using a virtual machine?

Best Regards,
Sven

 
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
4
Views
729
mmauldin
mmauldin
CAD2015
  • Locked
  • Question Question
Converting a PDF document to CGM file in NX.......................
Replies
2
Views
2K
CAD2015
CAD2015
swale2
  • Question Question
correct reuse file location.
Replies
4
Views
791
Toost
Toost
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
nyang
  • Locked
  • Question Question
Importing Step242 to UG as multiple bodies instead of compound file.
Replies
5
Views
1K
nyang
nyang

Part and Inventory Search

Sponsor

Back
Top