Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multi body part meshing

Status
Not open for further replies.
TCouch

TCouch

Mechanical
Joined
Aug 19, 2010
Messages
5
Location
US
In workbench, is the any way to mesh a single body of a multibody part without meshing the entire part. Any help would be greatly appreciated.
 
Sort by date Sort by votes
The only way to mesh a piece of the entire part, is to suppress all the other parts. However, even though this can be useful for finding problems, do not expect that the mesh on the individual piece will be the same when you do mesh the entire part.
 
Upvote 0 Downvote
I had some idea that it would change, I just didn't want to let it run for 15 hours meshing to find out that i had a bunch of problems.
Thank you for your help.
 
Upvote 0 Downvote
you can supress other bodies and do preview mesg
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
2K
struclearner
struclearner
md_salem
  • Locked
  • Question Question
how to assign material to auto-generated body in ANSYS 22R1 workbench ?
Replies
1
Views
554
jkupka84
jkupka84
andradesilva
  • Locked
  • Question Question
Problems validating Topolology-optimized part
Replies
0
Views
228
andradesilva
andradesilva
shiraz883
  • Locked
  • Question Question
Ansys eigen value buckling analysis | ASME Section VIII Div 2 part 5
Replies
2
Views
891
Drej
Drej
safranyikf
  • Locked
  • Question Question
Export min, max temperature and volume of all elements in a body
Replies
0
Views
518
safranyikf
safranyikf

Part and Inventory Search

Sponsor

Back
Top