Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Motion Simulation Help

Status
Not open for further replies.
Aaronkp

Aaronkp

Mechanical
Joined
Jan 25, 2011
Messages
1
Location
US
Hi, I thought I'd be able to create motion simulations using UG NX 5.0 fairly easily when I started working with it. I was very wrong.

Anyone got any kind of tutuorial to show how to create motion simulations from assemblies? Mine just seem to drop due to gravity. I'm trying to create a slider crank mechanism if that helps!

Any help would be appreciated!
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Through curves command // Blade help
Replies
0
Views
372
Nutria360
N
Gaia_BH1
  • Locked
  • Question Question
NX 11 Sequence - Motion Not Showing
Replies
0
Views
526
Gaia_BH1
Gaia_BH1
D
  • Locked
NX Help
Replies
2
Views
3K
Toost
Toost
jrhagen
  • Locked
  • Question Question
Need help decoding meaning of error codes
Replies
4
Views
3K
jrhagen
jrhagen
P
  • Question Question
Help Needed: "Clearance Analysis Object List Contains Invalid Objects" Error in NXOpen
Replies
2
Views
4K
Bleaker
Bleaker

Part and Inventory Search

Sponsor

Back
Top