Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monoflages Single Block and Bleed Valve with TAMAP / TAT Certifications

Status
Not open for further replies.
ShukriSamsudin

ShukriSamsudin

Mechanical
Joined
Jan 28, 2016
Messages
1
Location
MY
Hi There,

I looking for Monoflanges Single Block & Bleed Valve as below :-
01)25 x 1/2",150#,FF,ASTM B148 UNS C95400,TRIM MONEL : 1Pcs
02)15 x 1/2", 150# ,FF X NPTF UNS C95400,TRIM MONEL : 2Pcs

PREFERRED EX-Stock due to URGENT.Please reply me for any discussion regarding this matter.

Thanks
Shuk.
 
Status
Not open for further replies.

Similar threads

neroverdi41
  • Locked
  • Question Question
Control Valve and Diaphragm Actuator Force Calculation
Replies
4
Views
3K
neroverdi41
neroverdi41
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
35jacob35
  • Locked
  • Question Question
Valve Paint Aplication
Replies
3
Views
3K
SJones
SJones
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
neroverdi41
  • Question Question
Control Valve CFD Analysis
Replies
11
Views
9K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top