Aug 16, 2001 #1 tread Mechanical Aug 16, 2001 2 Can anyone suggest a simulation software (FEA) for the molding of rubber parts.
Nov 11, 2002 #2 SOLIDMODEL1 Mechanical Nov 8, 2002 32 Try contacting RAPRA, they have a software called SigmaSoft which predicts the direction, filling and curing characteristics of rubber as it enters the mould cavity. Hope this helps. Upvote 0 Downvote
Try contacting RAPRA, they have a software called SigmaSoft which predicts the direction, filling and curing characteristics of rubber as it enters the mould cavity. Hope this helps.
