Mold Design for LH and RH Component

[manikandaprabhuc]

Hi,

I wanted to create mold design for LH and RH component.

Its just mirrored components and the parting surface for both is same.

I dont want to create the parting surface for 2 times.

How do i do this with NX mold wizard 10.

Regards

Manikanda

 

[Xwheelguy]

Assuming you have the NX Help Documentation installed, I'd look into the WAVE subject and see if that suited your needs.

Tim Flater
NX Designer
NX 9.0.3.4 Win7 Pro x64 SP1
Intel Xeon 2.53 GHz 6GB RAM
NVIDIA Quadro 4000 2GB