Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modifing Patterns
- Thread starter ttx
- Start date
You have a few choices.
1-You cannot use INSERT inside a Pattern. You must delete the pattern, then add your chamfer and then Pattern the features together.
2-Keep the Pattern, and add a chamfer to the original feature of the pattern (this is called the first instance). Then Pattern the chamfer, but select REF PATTERN, and the chamfer will be automically addded to the original pattern. Now you will have two patterns, the hole and the chamfer.
Steve
1-You cannot use INSERT inside a Pattern. You must delete the pattern, then add your chamfer and then Pattern the features together.
2-Keep the Pattern, and add a chamfer to the original feature of the pattern (this is called the first instance). Then Pattern the chamfer, but select REF PATTERN, and the chamfer will be automically addded to the original pattern. Now you will have two patterns, the hole and the chamfer.
Steve
- Thread starter
- #3
- Status