Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modelling

  • Thread starter Thread starter skdash3
  • Start date Start date
Status
Not open for further replies.
S

skdash3

Guest
Dear Sir,

please tell me whether I can do 2D modelling (area) in proe and export as an DXF file

waiting for reply

skdash
 
You can model in Pro/E, then create a drawing and export this as a DXF.

If you just want to use 2D, you could use a sketched datum curve.



To make a DXF:

Pro 2001 - File > Save A Copy > DXF

Pro 2000i2 - File > Export > DXF



Note - The display mode usually has to be Shaded to get a DXF out.
 
Dear Sir,

Thank you very much for your prompt reply

But I am using proe 2000i version, so there is no save a copy

menu, can you please help

regards

Sarat Kumar Dash
 
help me to learn pro Engineer right from the basic with free downloads of tutors and manuals.

waiting for ur reply
 
In 2000!, same as Pro 2000i2 as proed metioned.



File > Export > Model > DXF



You can find your DXF file in you working directory.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top