M
mmr_chowdary
Guest
how we will develope m12 bolt using m8 bolt explain it briefly
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #2
A
AHA-D
Guest
Not in sheetmetal for sure
Similar designs are family table business. Copy the M8 bolt file to a more general description. Create family table. Add an instance "M8" that has the M8 parameters, by adding all variables that are specific to the size. Create a new instance as "M12", and change the relevant parameters.
Similar designs are family table business. Copy the M8 bolt file to a more general description. Create family table. Add an instance "M8" that has the M8 parameters, by adding all variables that are specific to the size. Create a new instance as "M12", and change the relevant parameters.
- Thread starter
- #3
M
mmr_chowdary
Guest
ok
thank you friend
bye
thank you friend
bye
Similar threads
- Locked
- Question